There is App Factory bug that does not show the "Misc" and "Material" options in an icon dialog on my app. I'm trying to make a notification creator. Also the scene, does NOT display correctly.

I have set up a szene for my music controls some time ago and it worked absolutely fine and displayed the track image, but after the last update it does no longer display the image given from a variable. The called variable is set by the "Music track changed" event's child variable %mt_art and contains a path to the image. 

Hi Joao, 

I've sent you an email through the app. I open a problem as well for the follow up.

I create the same profile over and over again on different devices (Pixel 5, Pixel 4a, Xperia XA2 etc ...) and they are working fine.

But with my asus zenfone 8 I cannot make tasker to read, correctly, the bluetooth state.

What does it mean ? 

I have a profile and task saying that if the phone is connected to my band (Mi Band 5), then volume of everything should be set to maximum. 

Actually, Tasker never detects when my

Is it expected behavior that implicitly changing the volume level via Tasker would turn off DND mode if turned on by tasker? Doesn't seem to do this if DND is turned on via Android UI. See attachment for VERY simple reproduction case.

Please tell me exactly (I'm dumb) how to completely disable the proximity sensor, since when I make a call the screen goes black.

Otherwise, since I just bought Tasker, if I can't do this, I want to return it for a refund.

It's the only reason I bought it.

Thanks!

Hi,

Don't know if it has been reported or not. And i do hope i can explain the issue for you guys to understand.

I have a task where i disable my 2nd sim when i have a day off according a certain calendar entry. I use the ADB Wifi command phone.setSimPowerStateForSlot (1.0) to disable it. It does work well and my 2nd sim is disabled. But here comes the issue, after i think aprox 12hr while the sim is disabled i can't reenable it anymore. My phone (Samsung s20 fe 5g - non rooted) doesn't see any available 2nd

All AutoApps are not showing up in Tasker. Please fix.

Out of nowhere "Power: Any" state change stopped being detected.

Zero clues. Zero messages.

Is there a way to discover the reason ? A Log ?

That Run Log from tasker itself doesn't register anything

I even created the simplest possible task (to beep) when power:any triggers. No deal. 

Hi, I have event where i need use only for SIM1 in  my mobile phone with dualSIM. I don't know how to se up an event only for SIM1. For SIM2 I don't need any events. Anyone advise me what to put in the variable ? 

First event is call screened and second send sms with text.

EXPORT: 

Unknown Caller Week (12) Restore: no Notification: no Event: Call Screened [ Output Variables:* Caller:* ] Day: Mon, Tue, Wed, Thu or Fri Enter: Anon (11) A1: Call Screening [ Disallow/Allow:Disallow Reject:On Silence:Off Skip Call Log:On Skip Notification:Off ] Exit: SendSMS (13)

Hello

I am having an issue with using Get Location v2.

My device: Samsung Galaxy S9, Android 10, OneUI 2.5

Tasker: 5.12.22 and it has all permissions.

Location is definitely enabled on my phone and I am testing outdoors.

If I use only Get Location v2 the task will return this error

However if I add Get Location (v1) in front of it, it does work:

Enabling High Accuracy on v2 doesn't work and isn't really something I want to do.

I have no specific settings in v2, other than Last Location on Timeout and Enable if Needed there is

Hello!

I have this profile set up:

STATE -> Variable Value ~ 1

Task:

A loop in which every 5 seconds it should do a http request and check whether or not it should open an app. This includes a Wait of 5 sec and a Goto 1 after the loop ended.

This works for a while, however after 2 hours (http request no longer required the app to open), it stops working (http request now requires it to). It's just like the profile and task never existed.

I have another profile which works fine, so Tasker isn't killed. I

Hi! Whenever a task is saved or when closing Tasker, this message shows Tasker needs the following permissions(s) for the functionality you have configured: Access fine location *Variable %WIFII The problem is, I'm aware the variable works with location only, but I denied this permission in purpose, because it is not needed for what I'm trying to accomplish. Only THAT variable is necessary for my task. Now, is there a way to prevent this notifications to pop up again and again? Because it is driving me crazy to click on cancel every time I try to configure some tasks. If

Hi,

I had Tasker installed on a new Samsung S21 running Android 11 - this was installed as part of migration from old to new phone. On the new phone I've never run Tasker, or set it up at all.

I've kept getting toast type messages randomly appear on my phone saying there was no permission to check for a license. I had no idea which app was causing this, but after pulling the logs I can now see it was Tasker. ADB logcat snippet below:

I've since run Tasker and accepted terms and conditions etc so hopefully it will

The Pick input dialog action is not working correctly. It does not return the variable %input. It simply do nothing.

I'm trying to remap the power double-tap action on my Samsung Galaxy S10 using Tasker.

I've seen the video on doing this with the Bixby key but am not having luck reproducing it with the power key.

- I've turned off the "Quick launch" toggle in the stock S10 camera - Got the popup asking if I wanted to set tasker as the power double-tap action (and restarted the phone as requested) - I've tried the adding the custom setting to make sure this persists at startup as per here

All to no avail.

- If I select the Tasker

I have used Tasker to load 2 apps split screen on a horizontal android head unit, but my current tesla style vertical head unit (Linkswell Gen 4) seems to ignore the split screen command in Tasker.  The 2 apps are thus loaded sequentially full screen.  

I have a messy csv file that i make multiple splits to be able to extract the datapart i need. When i finaly have the data i want i make a new variable (%csvA) with "variable set" and have the "structure output" checked.

When i then try to list all data from index 2 with %csvA[2]() i get nothing. If i list index 1 i get all the data from the variable.

To be able to only get the index 2 data i can use %csvA[2]() but only if i first go to the "Vars" tab, click the variable %csvA and

Pixel 3 Android 11

Used to work.  Do I need to set some new permissions?

I don't see any way to create a rule that would trigger every, for example, 5 days.

I want to automatically reboot my phone every x days.

Thanks for such an amazing tool!

I just used a 9 button scene and KEYBOARD action to create a DPAD and give myself the &^%$#@!!! arrow keys (and, eventually, the Delete key) missing from most keyboards.

  Good news:  It works!

Bad news:

  The keyboard disappears, then reappears after a beat.

It's kind of jarring to use, as-is.

Setting the "don't restore keyboard" flag is an ok workaround, but if it's possible to choose not to hide the keyboard that would be useful.