Brand new install of Tasker on a Fairphone 6 running /e/OS version 3.0.2 (Android 15).

I created a dead simple task to connect to a specific wifi network, but it fails. I get an error notification prompting me to email the dev ("Can't connect to wifi - Please click here to contact the developer about this issue") . I did a fair bit of research, but everything I saw about wifi not working was a few years old.

I had things working fine on my Fairphone 5 running /e/OS version 2.9 (Android 13) so I'm guessing it's something about the

I have a Samsung S24 running Android 15, everything is up-to-date, Tasker and Autoinput are set for unrestricted background use and Tasker is set to keep Accessibility running for itself and Autoinput. Once a day or so, I get the Accessibility notification that Autoinput service is running, so all seems to be OK.

But every few days, Accessibility stops for Autoinput and I have to turn it off and back on. I've also noticed that, when it does work, the Autoinput action takes much longer than it did previously. This all went south about the time that my phone

We are required by work IT to run Sophos Intercept X on androids. About a week ago it started blocking tasker with the notification attached. IT will not put in an exception. How can we get tasker delisted?

Thank you...tasker is a great program and didn't realize how much we depend on it until living a week without it!

Detection of running application stops after few seconds. I am using identification of an application within profiles to run some actions when application is open and when it is closed. Recently (few updates back) my Tasker started to behave differently. It seems to correctly identify the start of applications, however, after several seconds the Tasker reports the application was closed while I keep the application open. In other words it seems that the Tasker now reacts with "event" rather than "state". My device is Samsung Galaxy S10+ Android 12

Hi everyone. I have an AutoRemote profile connected to an Event that calls a task called "Task test". In the Profile Variables section I set the variable %var to 1 but this value is visible in Task test only if "Enforce Task Order" option is enabled. If "Enforce Task Order" is disabled a Flash %var action in Task test shows only %var. I try the same thing with another profile (AutoInputUI) connected to an Event and I have the same problem.  

Finally I try the same thing with a profile but connected to a State (Headset Plugged) and everything works

Ok then, i am publishing a little bug i discovered so Joao or his team can check it out

2 devices: SAMSUNG S8 (android 9) and S22 (android 13)

remote action execution behavior:

situation 1) when both devices are disconnected from my homelab vpn (zerotier), WORKS BOTH WAYS

situation 2) when s22 is connected to zerotier but s8 is not connected: WORKS BOTH WAYS

situation 3) when s8 is connected to zerotier but s22 is not connected: S8 can't receive actions, s22 can receive actions

situation 4) when both s8 and s22 are connected to zerotier: S8 can't receive actions,

Please Tasker is stuck on this screen, looks like the help screen,

How do I prevent it from being stuck there,

Regards,

Hello,

I purchased a license through Patreon. I see that my patreon account is connected, but I do not see the license in my Tasker account. Is there something else I need to do to receive my license? I did this yesterday, so it has been 24 hours since my subscription with Patreon.

I have an action that turns on vibrate mode at night (when Bedtime mode is activated), when it is run it turns off vibrate mode for some reasons even though my phone is not in DnD. Is there any workaround of fix for this issue?

If another action can be made for my use case - turn on vibrate mode when bedtime mode is turned on or at a given time at night, then turn it off in the morning or when bedtime mode is turned off. Also, when I create a time triggered profile, it creates an alarm. It

In Tasker, when setting up a Termux Action with a script, the configuration saves correctly and the script runs as expected. However, after restarting Tasker (e.g., force-closing the app), executing the Action results in an error. Opening the Configuration shows that the previously set path and script are empty.

• Android version: 14

• Tasker version: 6.6.3-beta

• Termux version:0.118.1

I've been using Tasker and the Hotword plugin mainly to launch HomeAssistant's assist.AssistActivity to use voice control. It has been working great for months. Since the last 2 weeks it simply stopped working. I installed an older version of the HA companion app because I thought a recent update caused the issue, but that wasn't it. I used other apps to see if it's a general issue, but it only seems to happen when using Home Assistant. When using the Android Home button, the Assistant launches just fine.

The log is below. Any ideas where the issue lies and how

System dialog "Chose input method" is shown, but closes/disappears immediately (~half a second).

Despite placing everything with the Api Key, and the Device ID, I get:

Here to say that Sophos InterceptX has restarted its blocking of all AppFactory installed apps and AppFactory itself. Nothing new per se, just returning to behaviour we thought was solved.

Hello,

On grapheneos (degoogled phone), installed the direct apk and purshased / activated license from paetreon, whenever i try to 'download' a task (dev task) i get a notification that the service wont run without google play services, when i try to import a task from a browser i get notification 'unknown google error', and when i have google play services temporarily enabled (sandboxed) i get asked to login to a gmail account, which is not something i want to do and defeats the purpose of getting a standalone version. 

i tried installing and uninstalling multiple times aswell ass clearing

After migrating to my new phone I have this missing plug-in:

com.intangibleobject.securesettings.plugin

But when opening googleplay store. The plug-in is no longer available. Any help?

App stopped recognizing the cell towers I was near. When I try to rescan nearby cell sites, a pop-up appears that says "error:listen" Tasker version 6.5.11, Android version 15, Samsung Galaxy S23, One UI version 7.0

Motorola Stylus G 2022 - Android 13

I have pretty much followed the FAQ and Dontkillmyapp suggestions. Tasker works fine while the screen is on. But as soon as it locks I have a problem. I set up a simple task of turning off Airplane Mode, waiting 10 seconds, then turning Airplane Mode back on and exiting. It does this every 2 minutes. With the screen off (and locked) it will turn off Airplane Mode but doesn't turn it back on. So when I turn on my screen I see my cell connection is on. So with the screen off,

Tether works manually and used to work with tasker until a while ago.

Here is the log for the activation: 22.12.21/E current state: 1 22.12.21/E Compartilhamento WiFi: cur: false new: true 22.12.21/E Compartilhamento WiFi: setWifiEnabled() 22.12.21/E Compartilhamento WiFi: Couldn't do with class com.joaomgcd.taskerm.tether.l: couldn't enable tether: "Service Unavailable" 22.12.21/E Compartilhamento WiFi: Couldn't do with class com.joaomgcd.taskerm.tether.j: android.net.IConnectivityManager.startTethering [int, class android.os.ResultReceiver, boolean] 22.12.21/E Compartilhamento WiFi: Couldn't do with class com.joaomgcd.taskerm.tether.k: android.net.IConnectivityManager.startTethering [int, class android.os.ResultReceiver, boolean, class java.lang.String] 22.12.21/E Device doesn't support Wifi Tether 22.12.21/E Ação Compartilhamento WiFi falhou. 22.12.21/E result: stop task (error) 22.12.21/E Erro: 1 22.12.21/MacroEdit action finished exeID 1