I recently startet replacing JavaScriptLets in my kidapp with HTTP Request actions and now my kid app complains about missing access storage permission whenever this action runs.

I don't use the action to access storage so it doesn't need this permission. Please fix this as I can't use the action as long as it asks for unnecessary permissions. It should only ask for this, if a file output is set.

Thanks

I find if I use Custom DND with a suppressed effect (tested with Peek) then set DND to 'Allow All' the suppressed effect is still in effect.

I tested this with the following: Custom DND (with Peek suppressed) -> DND Allow All -> DND Query -> Flash %dnd_suppressed_effects().

As a workaround I use Custom DND with no suppressed effects then DND Allow All (just to clear the DND icon)

Hello,

I have a task that always ran successfully until Android 11. I can no longer turn off wifi. I've tried Net-Wifi Off and Custom Settings methods and neither works.

Any other way to accomplish?

While i testing with the time event with the "every" option, i realized that this doesn't count correctly. I tried with the minimum of 2 min, I wanted a task to run every 2min when when I enable this profile, but it runs before the set 2min. I think this happens when you activate the profile, doesn't count the minutes correctly

Hi,

I have a profile Call state any + any sensor state -> speakerphone On,

However, when I put my hand to proximity sensor any sensor event turns green even there is no call state.

Does it mean it keeps checking any sensor condition irrespective of other conditions and possible battery drain?

I don't have any means to validate this except reporting to you to check at your end.

Thanks.

When I have updated Tasker 5.11.1.beta on today, then Kaspersky Internet Security showing virus in Tasker. 

Yesterday (or possibly one or two days before, I had tasker turned of for a while) one of my tasks that have been working for years started chrashing. After some debugging I've isolated the error to a 'set variable' where I add two other variables using 'do maths'. The problem occurs when the second of the variables added is negative. Trying to replicate the errror I found that if i just tried to set %newvar to e. g. 3+-1 there's no problem, but if i first set %var to e. g. 0-1 (getting a negative result) and the try to

Task: ALERT/SAY  Text: The time is %TIME

Result if 09:56: "The time is nine fifty-six."

Result if 10:28: "The time is ten point two eight."

This can be easily recreated by:

Task: ALERT/SAY  Text: 09.56 10.28

Result: Nine fifty-six ten point two eight 

Samsung Note 20 Ultra, Android 10, kernel 4.19.81, not rooted.

I'm trying to write a simple task that will send calls to voicemail if the number isn't in my address book.

I've enabled all the permissions on tasker (screenshot attached), but it still says it needs the "Start a phone call" permission when I either activate it or just try "playing" it.

Here's the error when I "play" it: (also screenshot)

18.09.27/E Tasker needs the following permission(s) for the functionality you have configured: Start a phone call 18.09.27/E End Call: don't have permission(s): Start a phone call 18.09.27/E result: stop

Many users are reporting that the speakerphone action is broken. I know that it never worked on my Motorola Droid Turbo 2 with Nougat or my Samsung Galaxy S9 with Oreo.

OnePlus and Pixel devices are also experiencing this issue.

It appears the update to Android 11 on my Pixel 2 had broken immersive mode. The nav bar will not hide!

I have a basic profile for replying location:

Look at received texts

-> Get Location v2 (Enable location if needed)

-> Send SMS (send to %smsrf; message is map url; Store in messaging app is unchecked)

The sent sms still shows up in the default messages app (Google Messages).  Does the same thing on a Pixel and Pixel 3.

Are there any suggestions as to how to stop the sent message from showing up in the messaging app?

Thanks,

I'm calling a bunch of URLs with HTTP Request on various events. Noticed that these don't work if the url starts with a capital Http - it must be lowercase http.

Hello.

Actually, my device is an Xiaomi Redmi 8 Miui 11 (Android 9). When I use "Screen Capture Action", or "AutoInput Screen capture" in a task, allways ask permission to initiate the record, so I can't automate screen capture because of user interaction is needed. In my previous device (Moto G3rd android 6.0.1)  theese actions works fine.

Could you told me how I can solve it? 

I've attached screen capture showing the message. Sorry, it is in spanish.

Thanks in advance.

I ahd a profile which looked at the state of %INTERRUPT before changing it so that it could be restored later.  It stopped working recently (not sure when).  However where %interrupt used to one of the values:

1. all
2. alarms
3. none
4. priority

It appears now to return a numeric value?  Any idea what these are, when and how the change happened and whether we can rely on the new values in profiles or tasks?

I've bought taker before. Now I want to install it on my car which has android 4.2.2 in it. I download older version of taker and installed it already. But it asked for authorize code. Can you give me one or I have to buy it again?

I have recently updated my system rom and Gapps packages. The new clock app is now slightly different (which is very cool and with assistant now integrated). It seems tasker has stopped recognising when my alarm is done and my profile is not triggering any more. Any fixes for that?

With the following task, if lines three to five are not deactivated, then the error shown below will pop up when the tasker editor is started, if you edit the task. That is, just open up the task, don't change it, close it, close the tasker editor, open the tasker editor and the error dialogue shown will pop up. There is no need to run the task to get the error message. Lines three to five actualy work fine, you just get an error message every time you edit the task.

Fortunately I have discovered a work around which is

I'm pretty sure it was working some time ago, but no matter if I use the device name or MAC, it keeps connected. I tried unpairing it as well just to see what happens and it throws the error "Unknown error removing bond".

Is there any chance disconnecting devices will work again on Xiaomi devices?

If there's no answer when a get voice action is launched, Tasker crashes instead of continuing to next action.

That's important to me, as I'd like to use voice control to acknowledge being alive and safe in mountain, and if not, I might not be able to answer, the lack of answer repeatedly 3 times would be the signal to send sms to rescue team.

It can work only if get voice action doesnt make Tasker crash in case of lack of answer

Thanks for your help