I have a Galaxy S20 Ultra 5G (not rooted). Previously on Android 12. Just upgraded to Android 13, on any tasks to launch apps, I get the error "Launch App: failed to launch com.sec.android.app.xxx". It doesn't read like a permission issue. Run Log just shows "err" on the launch app task.

I've tried re-setting cache from recovery menu.  Also tried wiping data/cache for the tasker app.

Any suggestions?

Small white flashing box at the bottom of Tasker everytime I open it. It says "Can't connect to ADB Wifi. Check here: https://tasker.joaoapps.com/userguide/en/help/ah_adb_wifi.html"

This happens when I have zero profiles enabled, and ADB Wifi is disabled in Developer Options. I tried adding a port in the Tasker settings, but the error never goes away. Issue started after upgrading phone to Android 13, and was not having this nagging error message when running Android 12.

I've followed the directions on the link provided, but it works until Wifi Debugging is disabled (as I don't want it on), the phone is rebooted (scheduled

I want to use the LaunchApp-function, Activity of the System Contacts-App to let the user choose a contact from Contact List. Dialog is shown properly, Contact(s) can be picked. But how do I get the results of this dialog? Are they stored in any variables?

I tried creating a battery status of my Mi Band 5 using notify but I noticed that only % appears but the value of the variable is correct. (Ex: 26)

I also tried putting the number manually, it works. But if I'm using variable, it's not working. I even tried using Variable set just to convert the match from A1 to another variable but it also doesn't work and it shows %b instead. Meaning, it's not really converting the variable into its value. Just %battery. 

    Profile: Mi Band Battery Status

     Event: Logcat Entry [ Output Variables:*

I have an action that starts some text to speech. I have another action that shuts it up. I want to trigger shut up with a shake but tasker isn't getting or isn't action on the shake whilst the text to speech is ongoing.

Device OnePlus CPH2399 ("Nord 2T") Android 12 Tasker version 6.0.10

The state Wifi Near doesn't trigger when device's screen is off (device is locked). Only first after the device's screen goes on (device gets unlocked) does the state trigger. Other actions e.g. Beep, Perform Task, etc., can trigger when screen is off. Location Net context also can trigger when screen is off.

Tasker should make a native workaround analog to Net/Cell Wake Screen.

I created separate task for enabling and disabling app. After running diabling app task app are disabled but both enable and disable task disappeared from taker. How do enable those disabled app?

Since the latest android update (Samsung A13, One UI v5.1) the call forwarding is not possible anymore.

Neither with ussd codes nore via "normal" phone -> settings.

If i deinstall tasker and restart phone, it is working again.

This function loss is quite a big problem for us, because we use it for an automatic call forwarding (on-call service).

Please help me, thanks!

Hi João!

The fade-in animation on custom toasts is a real dealbreaker for me at the moment in terms of actually being able to use them. I really wish that new toasts would display instantly rather than fading in slowly over the top of the previous one. This is especially jarring and obvious when displaying different text or background colours in quick succession.

If we could remove the fade-in completely and furthermore make sure only one toast is shown at any one time (either implicitly when creating a new custom toast, or via a separate 'cancel existing custom toasts' action),

Currently, Tasker prevents the deletion of tasks that are associated with profiles. If a task is not associated with any profile, but is used in one or more other tasks using the "Perform task" action, the user may mistakenly delete such a task and Tasker will not show warnings about the consequences this deletion. It is necessary that the user be warned if the task being deleted is used in other tasks. I believe that this is easy to implement, since even now, when renaming a task, the user is warned about the name change in links to this task,

Tasker mobile network state 'Active' does not apply when a connection is established using ipv6 only. When connected using ipv4 the 'active' state is properly set.

I was purchased app via google play and all time app is work properly except disconnecting from internet.

But last time after disconnect wi-fi and 4g tasker send me "Trial over. can't be used.... click OK to purchase". When I connecting networks app work normally.

I cannot stay my all devices connected because tablet have no sim and this is real problem.

Tasker version 6.1.32

When using "Element Add Geomarker" there is a field called "Spot Colour" which allows you to set the colour of the spot surrounding the marker.

If the spot radius is set to 0, this parameter disappears, which makes sense. But if you set spot radius to a variable (e.g. %marker(3)) the spot colour parameter also disappears. This means you can only use spot colour if the radius is a constant.

I imagine this isnt intended

Android: 13 (TQ3A.230705.001)

Hi! 

I have recently bought a new phone but I can't restore my geofences from my previous phone. I only have the option to backup but not to restore. If I click backup it tells me the file path and says it doesn't exist.

I can see someone else has the same issue here: https://www.reddit.com/r/tasker/comments/167l1yq/autolocation_autoshare_others_cant_backuprestore/?rdt=47611

Thom

If i try to create an "HTTP Response" for an previously received "HTTP Requests" it is not working if i call the Action "Test Next Alarm" in the same Task before the action "HTTP Response".

Tasker Version: 6.2.12-rc

Android Device: Pixel 6 

Android Version: 14

Tasker does not perform the task of switching bluetooth on/off. A message comes up that it is due to Google policy. I cannot use the " Auto off unpaired bluetooth" profile now. Is it possible to solve this problem?

After upgrade to 6.2 the MQTT Client -> https://play.google.com/store/apps/details?id=in.dc297.mqttclpro&hl=en_US

not work correctly with tasker for the "publish MQTT".

Downgrading to the 6.1 all works fine.

Just purchased tasker for my old Samsung Galagy Note 10.1 tablet on Android version 5.1.1

Installed fine, but after launching, I can not find a way to get past the initial Data Access screen.  There are no buttons anywhere to move forward.  

Application manager shows it to be version 6.2.22

Any help appreciated 

Thanks

Nick

I am trying to create a child app that will do some action on event but found that while it works in Tasker, exporting and installing it as a child app doesn't.

I am on a Samsung Galaxy S24.

See sample Tasker project below. It is supposed to flash a message when we enter/exit chrome, or if we cover/uncover the light sensor.

    Project: TA-Test

    

    Profiles

        Profile: TestApplicationProfile

         Application: Chrome

        

        

        

        Enter

When I performed the following task, the following error was output. Please let me know how to deal with it.

Task: 1autosharetest A1: Status Bar [ Set: Collapsed ] A2: App Info [ ] A3: Variable Set [ Name: %package To: %app_package Structure Output (JSON, etc): On ] A4: AutoShare [ Configuration: Package: com.android.settings Class: com.android.settings.applications.InstalledAppDetails App: Android Action: App Details Settings Data: package:%package Timeout (Seconds): 10 Structure Output (JSON, etc): On ]

08.05.22/LicenseCheckerTasker Checking cached only 08.05.22/LicenseCheckerTasker cache validity left -264764 08.05.22/LicenseCheckerTasker Cached status: Licensed 08.05.22/LicenseCheckerTasker Cached only: Licensed 08.05.22/ActionArgBundle key: IntentMimeType: replace String value with null 08.05.22/Variables doreplresult: