Open Tasker, click on scenes and then the orange + add button.  I get the popup to give it a name.  Type in any name, hit the checkmark.  About half a second to a second later tasker just crashes and I am back on the home screen. 

Did the report issue in tasker, included screen recording.

When I perform the action "Set Alarm" with "Vibrate" set to "Off", the alarm will still vibrate when it goes off. Changing the parameter does not seem to impact the alarm that will be set.

However, the parameters for hours, minutes, and label work perfectly fine.

Tested on OnePlus 10 Pro - OxygenOS 13.

Same as https://tasker.helprace.com/i1054-http-request-action-throws-missing-access-storage-permission-notification-even-if-no-file-output-is-configured-in-the-action

Which should be already fixed, but it';s not.

I'm not sure if more system apps are affected, but at least SystemUI does not appear in the list of apps in the "kill app" action. I also can't input a package name to work around the bug.

It looks like there is problem in HTP request action in combination with IPv6. It can be tested with URL https://fallback-v6.ipv6-test.com/json/proto.php which works over IPv4, but not IPv6 and contains both A and AAAA DNS records. Test task attached. There are two bugs.

Use cases:

Connected to network which doesn't support IPv6:

• Tasker gets A record
• HTTP request works - CORRECT

Connected to network which supports IPv6:

• Tasker gets AAAA record
• HTTP request fails - BUG
• there should be fallback from (not working) IPv6 to IPv4. That URL in browser loads fine (after small IPv6->IPv4 fallback timeout)

Connected to network

I'm unable to create (export) ANY new project as App because every time I try I get the following set of messages:

1. prepare directory
2. unpack factory assets
3. decompress factory assets
4. shrink unneeded files
5. convert drawables to builtin

error: loading android.resource://com.google.android.apps.fitness/drawable/2131820556

error: failed

The above is an example where I've tried to use an existing App icon (Fit in this case). But no matter what I try, Holo, Material, Misc, Crystal HD Project, I Like Buttons HD, the same type of error occurs with different resource ids. I've uninstalled and reinstalled Tasker with no change. BUT if I change the app

Versions after 5.14.8 have an error, the action of moving a photo or screenshot from folder to folder tightly hangs the media scanner process, only a reboot helps (I tried on 3 Xiaomi mi 11 ultra, Redmi note 10 pro, Redmi note 9 pro devices).

As a result, the moved files in the gallery of any applications are missing until the reboot (telegram, regular gallery or any of the market).

Example:

A1: Wait [MS: 700]

A2: List [Directory: DCIM/Screenshots/ Sort Select: Alphabetic Variable Array: %SCREENSHOTS ]

A3: Move [From: %SCREENSHOTS(1) To: Pictures/Screenshots ]

A4: Vibrate [Time: 200 ]

A5: Scan

When converting actions into Task it's possible to save the Task without a name.

Tasker 6.1.3-beta

Hello,

I'm using tasker mainly for activating airplane mode and wifi in different situations.

Unfortunately, on my Pixel 7Pro (security patch Dec. 2022), I can't switch WiFi on or off when the phone is in airplane mode.

I can switch on or off when phone's radio is active.

Tasker Settings 1.2.0 is installed, Tasker up to date, all permissions granted.

Is there any solution?

This behavior also seems to break the Toggle Wifi quick tile.

Thanks,

Matthias

Tasker causes a significant lag in showing a Input Dialog (the first action in a task) when a task starts from a start screen. List Dialog is also affected. There's no lag if a task performs in Tasker itself.

I need to launch Android Auto from Tasker on a Samsung a51-5g smartphone running Android 13 and I always get error 1 and Tasker has all the necessary permissions. I am attaching the error message that Tasker provides.

16.02.45 /Utils startActivityWrapper: activity not found 16.02.45 /Log startActivityWrapper action: android.intent.action.MAIN 16.02.45 /Log startActivityWrapper pkg: null 16.02.45 /Log startActivityWrapper cpkg: com.google.android.projection.gearhead 16.02.45 /Log startActivityWrapper ccls: com.google.android.gearhead.vanagon.home1 16.02.45 / Log startActivityWrapper flags: 805306372 02.16.45/E Launch Application: Failed to launch com.google.android.gearhead.vanagon.home1. 16.02.45/E result: stop task (error) 16.02.45/E Error: 1 16.02.45/MacroEdit action finished exeID 1 action no 0 code 20 status: Err next 0

How

I recently discovered the device control tiles (also known as power menu controls) and I love them. The ability to switch my Hue lights on and off AND being able to change the brightness with a simple swipe on the tile is just so handy. But unfortunately, there is a bug. When I long press one of the tiles, the whole system ui crashes for a few seconds. This is kinda annoying because this happens quite often when I want to adjust the brightness of my lights just a tiny little bit and am too slow while swiping. Actually, I'd

Hello,

I am trying to install Tasker on my android head unit in my car.

The unit runs android 10. Upon opening the app I am asked to choose between Tasker or Tasky and then check all the required boxes.

When trying to check the accept terms box, the app crashes. Usually, it should show a popup but it just crashes repeatedly.

I have already tried to reboot the unit, to reinstall the app, and to install the tasker apk versions 6.0.10 and even 6.0.9 without any results.

Does anyone know a solution or have the same problem?

Hi. I downloaded taskr from the website and installed it specifically to try the trial version. I went through setup to enable a lot (maybe not all) of its functions. Then this page pops up (a few minutes after install) to say I have to buy it. What happened to the trial version? (Screenshot attached)

I have a notification with two buttons that I use as toggles. They are red when on, green when off. They toggle great during the day, but lose their colors when dark mode is activated on my phone (see attachment.)

Suggestions?

Thank you

I have two identical Samsung Galaxy S4, SM-GT1906, phones running Android 5.0.1 and Tasker application. Both Tasker app have the same problem: The three vertical dots at upper right corner are missing. See attachment.

One S4 is rooted and the other one is not.

Besides those S4's I have Samsung S9, OnePlus One and Redmi 8T. Three dots are okay.

Device OnePlus CPH2399 ("Nord 2T") Android 12

Tasker version 6.0.10

Relevant background information :

• Tasker can successfully turn on/off Wi-Fi of the device. (With https://github.com/joaomgcd/TaskerSettings .)

Problem Reproduction (sequential steps) :

1) Make sure device is more than "capable" in terms of processing power (e.g. at least mid-range smartphones). Make sure device has more than enough free storage memory (e.g. 200 GB). Make sure device has more than enough free RAM memory (e.g. 8 GB). Make sure device doesn't have many other apps opened, or run, or even installed. Make sure device is problem-free (fully up-to-date, no virus, etc.). You

Tasker handling of beacons (iBeacon, Eddystone, etc. etc.) is not possible because operation of BT Near with beacons is not reliable. Active Profiles keep going inactive again several times a minute even though neither the phone nor the beacon have moved at all. Although this false reporting of "BT Beacon Gone" can be reduced somewhat by careful tuning of the monitoring parameters, it cannot be reduced to a tolerable level.

The problem acts as though for faster response _both_ Tasker and Android are trying to detect the "BT Beacon Gone" condition at the same time. This should not be happening.

 After upgrading to pixel 7pro, this profile doesn't work. It is a simple task call when Bluetooth is connected to my car. Runs just fine when device connects, but doesn't recognize when Bluetooth disconnects. Will stay that way for hours despite being nowhere near my car.  

Profile: Driving Mode      State: BT Connected [ Name:DMH-W4660NEXFE3D Address:* ]                    Enter Task: Driving Mode     Settings: Abort Existing Task          A1: If [ %DrivingMode ~ Off ]              A2: Variable Set [              Name: %DrivingMode              To: On              Max Rounding Digits: 0 ]              A3: [X] Do Not Disturb [              Mode: Alarms ]              A4: [X] Media Volume [              Level: 25             

V2 click action takes twice as long as v1, see reddit thread.https://www.reddit.com/r/tasker/comments/11agehx/autoinput_ui_query_too_much_info/?utm_source=share&utm_medium=android_app&utm_name=androidcss&utm_term=1&utm_content=share_button