I have an action that turns on vibrate mode at night (when Bedtime mode is activated), when it is run it turns off vibrate mode for some reasons even though my phone is not in DnD. Is there any workaround of fix for this issue?

If another action can be made for my use case - turn on vibrate mode when bedtime mode is turned on or at a given time at night, then turn it off in the morning or when bedtime mode is turned off. Also, when I create a time triggered profile, it creates an alarm. It

Hello,

I purchased a license through Patreon. I see that my patreon account is connected, but I do not see the license in my Tasker account. Is there something else I need to do to receive my license? I did this yesterday, so it has been 24 hours since my subscription with Patreon.

Please Tasker is stuck on this screen, looks like the help screen,

How do I prevent it from being stuck there,

Regards,

Ok then, i am publishing a little bug i discovered so Joao or his team can check it out

2 devices: SAMSUNG S8 (android 9) and S22 (android 13)

remote action execution behavior:

situation 1) when both devices are disconnected from my homelab vpn (zerotier), WORKS BOTH WAYS

situation 2) when s22 is connected to zerotier but s8 is not connected: WORKS BOTH WAYS

situation 3) when s8 is connected to zerotier but s22 is not connected: S8 can't receive actions, s22 can receive actions

situation 4) when both s8 and s22 are connected to zerotier: S8 can't receive actions,

Hi, it would be very nice

1. An action to get, inside a task, its execution ID
2. Stop a task execution using its execution ID (instead of its name)

These features would be very useful expecially with multiple instances of the same task running together

Hi everyone. I have an AutoRemote profile connected to an Event that calls a task called "Task test". In the Profile Variables section I set the variable %var to 1 but this value is visible in Task test only if "Enforce Task Order" option is enabled. If "Enforce Task Order" is disabled a Flash %var action in Task test shows only %var. I try the same thing with another profile (AutoInputUI) connected to an Event and I have the same problem.  

Finally I try the same thing with a profile but connected to a State (Headset Plugged) and everything works

Detection of running application stops after few seconds. I am using identification of an application within profiles to run some actions when application is open and when it is closed. Recently (few updates back) my Tasker started to behave differently. It seems to correctly identify the start of applications, however, after several seconds the Tasker reports the application was closed while I keep the application open. In other words it seems that the Tasker now reacts with "event" rather than "state". My device is Samsung Galaxy S10+ Android 12

We are required by work IT to run Sophos Intercept X on androids. About a week ago it started blocking tasker with the notification attached. IT will not put in an exception. How can we get tasker delisted?

Thank you...tasker is a great program and didn't realize how much we depend on it until living a week without it!

Hi,

I would like to know if the following actions could be improved as described:

- List Dialog: Add 'Output Variable Name' field. - Input Dialog: Add custom buttons like in the List Dialog action.

Thank you!

I have a Samsung S24 running Android 15, everything is up-to-date, Tasker and Autoinput are set for unrestricted background use and Tasker is set to keep Accessibility running for itself and Autoinput. Once a day or so, I get the Accessibility notification that Autoinput service is running, so all seems to be OK.

But every few days, Accessibility stops for Autoinput and I have to turn it off and back on. I've also noticed that, when it does work, the Autoinput action takes much longer than it did previously. This all went south about the time that my phone

We already have "on value selected" when the user releases the slider in a different position.

It would be nice to have "on value changed" so we can do things while the user is still sliding it.

Brand new install of Tasker on a Fairphone 6 running /e/OS version 3.0.2 (Android 15).

I created a dead simple task to connect to a specific wifi network, but it fails. I get an error notification prompting me to email the dev ("Can't connect to wifi - Please click here to contact the developer about this issue") . I did a fair bit of research, but everything I saw about wifi not working was a few years old.

I had things working fine on my Fairphone 5 running /e/OS version 2.9 (Android 13) so I'm guessing it's something about the

There is an open-source app called Be Nice that seems to have successfully implemented split screen support for modern Android devices. Perhaps Tasker could use it for inspiration on getting its Split Screen feature working again. Here's the source on GitHub: tkuenneth/BeNice: Split-screens on Android made easy

(Note: I'm not affiliated with Be Nice. I just ran into it on Reddit.)

Shown in screenshot.

The buttons also covers things in other menus and areas of the app, not in the screenshot, including but not limited to the VARS tab.

Tasker 6.5.11 Pixel 9 Pro XL Android 16, June 2025 BP2A.250605.031.A2

There are a lot of times when you want to show some text data on the screen but right now if you want make a style change to your text you are limited to use mostly 3 options: 1. Scenes which has serious problem with sharing with other people devices. 2. AutoTools Web Screen which is for more advanced users. 3. AutoTools Dialog seems to not support RTL languages.

I am suggesting to give more html tags support for more popular actions like Text/Image Dialog or List Dialog that most people use. I would prefer a more "native" style so

I'm using a webview in a scene to show a mjpeg stream from an ip camera URL. The video do not shrink in the webview so only a part of the video size is visible. Maybe a config parameter could do the work

After installed, it immediately says it's over

I've been troubleshooting why Tasker's "HTTP Request" action fails to download from a Google Drive link, even though "HTTP Get" works perfectly. After some digging, I found a simple fix that makes "HTTP Request" behave like "HTTP Get" in this case:

When using the "HTTP Request" action to download a file (like an image) from a URL such as:

Make sure you do both of the following:

1. Enable "Automatically Follow Redirects"

2. Add a Mime type custom header in the Headers field:

You can also add:

…to better emulate a browser.

When Tasker has an active Lock Code and "Backup User Vars/Prefs" option is unchecked in preferences: 1. we shouldn't be able to export backup data, through the 3-button menu on top right, before inputting correct Lock Code

2. Project variable values shouldn't be included in the backup data. Same as global variables, they should be omitted in the Tasker backup data