Call forwarding always worked for me until the Android 14 upgrade.   I have a Samsung S22+. 

Now, Tasker launches the phone app, but it doesn't actually dial the number. It just sits there and I have to press dial.  To forward, I'm dialing the Verizon *72 sequence. I verified that I have the auto dial box checked.

Oddly, call Forward End *73 still works. 

Larry

Would be beneficial for certain scenarios where a user may want to increase or decrease maximum tasks queued at different times without needing to manually do it inside of Tasker. 

I want to have Galaxy Tab A8 turn off when I am on a trip and turn off the car instead of letting it go to sleep. Thank you.

I have several projects at the bottom. A few of them are locked. If I am in one of the locked projects, and then leave or close the app, then when I next open the app, I am naturally prompted for the lock code. However, if I don't have the lock code, then it forces me to leave the app. I can't find any way to switch to another project. I think it should allow for the option to switch to another project that isn't locked, given that "lock on startup" is not enabled.

https://streamable.com/vvogu5

Dear Joao,    many months ago I started using tasker. So far I have created everything I could mostly using autoinput since it was easier and a few tasker functions specifically for the profile part (time, event and state). The main reason I have started using tasker however is that i wanted to automate stuff I do on a daily basis. Along the way I have added the goal to integrate my devices via tasker and join and I'm still busy with that and so far it is going well. However there is one profile that i can't create since

It would be really useful if there was a variable, something like %ACTIVE that could be used in profiles to note when a task is running. It would be the same as using %TRUN !Set, but if possible, set to true and false when tasks run or not so that many profiles don't need to check for the turn state every time it changes.

Accidental touches cause profiles to be turned off. Can you provide an option by which users can decide to show a confirmatory box before turning on/off a profile from the home page?

Sent to support email, but trying here as well... I know from this closed post:

https://tasker.helprace.com/i1649-autolocation-can-t-backup-and-restore

That there is an update to AutoLocation to allow backup/restore on newer devices. However, that update isn't available yet on the Play Store (I am in the Autolocation beta). I cannot sideload apps on my device due to Work profile policy.

Can a fixed version be made available on the Play Store?

App Info output variable %app_apk_public_source_dirs() returns the paths to split APK files belonging to an app. When App Info receives the package name through a variable, for example when in the enter task of a profile triggered by event New Package or Package Updated which passes the package name in %evtprm2, the output contains duplicates and variable names %app_apk_public_source_dirs[numbers up to 10].

For example, we install Simple Flashlight from the Play Store (so it consists of multiple APKs) and set Package/App Name in App Info to com.simplemobiletools.flashlight. %app_apk_public_source_dirs() returns:

/data/app/~~B7hw9LsIMvoKBAxtESVvqw==/com.simplemobiletools.flashlight-zfPGc_nUh-lfXyne8IYBXw==/split_config.en.apk,/data/app/~~B7hw9LsIMvoKBAxtESVvqw==/com.simplemobiletools.flashlight-zfPGc_nUh-lfXyne8IYBXw==/split_config.xxhdpi.apk

Next we first create a variable and assign it the

Using the Element Depth action on a video element causes all videos in the scene go black and restart. This is annoying because videos take several seconds to restart.

Happens no matter what combination of element or scene settings there is.

I used to kill the app with the help of built in command in Tasker in Android 13. What I have noticed is that after Android update to 14 this feature doesn't work as it is expected. Say I want to kill the Firefox running, and after I trigger the kill command I still observe Firefox running as nothing had happened to it. I also used the adb command am force-stop but the output was the same.

Proposal:

Allow multiple tasks, scenes, and profiles to have the same name so long as they're in different projects. You can have the default be to check the current project so you don't break people's stuff and you can make it so that if there's only one task with said name, it'll use that one to further the not breaking of stuff.

Examples:

1) Project "Main" has a task named "Get Project Name" which returns "Main" while the project "Chrome" also has one which returns "Chrome". You could access Main's task thusly, "Main(Get Project Name)" and if the calling task

I like to bring a running app to the foreground.

When I use the Launch app command it starts the app with its start screen.

Same as you would start the app when it was not running.

I need the app to stay on the screen it is on and only be brought to the foreground.

Same as if you would switch to an running app by hand.

On My Google Pixel 7 Android 14 the alarm notification "00:00" occours again. Resetting "use reliable alarms" to never has only a temporary effect, after a minute the alarm notification occurs again. Also clear the data and cache does not help?

Any hints or ideas?

Tasker Version 6.1.32

I created automation when I launch wallet app, to enable nfc. And close it on exit.

The task itself work when I run it manually. However not when I lunch the app.

It worked before and stopped working.

net.dinglisch.android.taskerm version 6.1.32; flavor: market; Source "com.android.vending"; BuildTime 2023-05-11 17:54

OS Buid UP1A.231005.007

OS Code 34

OS Target 31

Device Pixel 6

Manufacturer Google

Product oriole

User report: opening / closing wallet app does not trigger automation

Files:

https://drive.google.com/file/d/1Zpa3QZ_RFHF6ND-35hTHR9hPOghAeUYz/view

WIFII variable not showing SSID even when location is on and permission granted.

Android 13. Tasker Settings installed. All permissions enabled.

I have a Wifi I regularly connect to. I have a Tasker profile that reacts to this Wifi being connected to and does some tasks. I recently enabled "Private DNS" setting in Android. Unfortunately this specific Wifi does not allow encrypted DNS (a.k.a. Private DNS). This means, I can connect to the Wifi successfully, but internet access over that Wifi is not working (exclamation mark besides the wifi symbol, internet not working with disabled mobile data).

I wanted to make Tasker disable "Private DNS" when connected to that Wifi and re-enable it when disconnecting to that Wifi. Unfortunately, this does

When i scroll through profiles/tasks in the lists i cannot see if there are some changed (not default) properties or profile/task -variables set.  This makes debugging hard, for ex. i wonder why my profile does not activate when in fact there is a cooldown set. 

If tasks/properties would have an indicator showing "there is something set in the properties." debugging would be a lot quicker sometimes.

When receiving a notification from my phone on my desktop via Tasker Join, the focus on the currently working app is stolen from the notification which means that if I am typing something, it is interrupted every time I receive a notification and I have to Alt+Tab to return to my application.

Paid for app in previous build of android or different gmail account, happy to pay the fee when i can. Cheers Scott